TPHM INOX

TPHM Inox manual highlifter
TPHM Inox manual highlifter
TPHM Inox manual highlifter - drawing
TPHM Inox manual highlifter - forks
TPHM Inox manual highlifter - Release handle

TPHM Inox manual highlifter

STAINLESS STEEL MANUAL HIGHLIFTER

This manual highlifter with high lifting capacity is particularly suitable for fishing, slaughtering and pharmaceutical industries, i.e. for all those places where the requirements in terms of hygiene and health are particularly stringent. The highlifter is made of stainless steel, thus it can withstand humid or aggressive environments and can be cleaned with strong chemical products.

For particularly aggressive environments, the pallet truck can be made of acid-resistant stainless steel. This manual device is provided with “quick lift” function. Load lowering is controlled by a release handle, which allows the operator to increase the lowering speed at any level.

The stainless steel highlifter features stainless steel frame, tiller arm, shafts, pins, moulds and screws. The lifting cylinder, scissors legs and battery compartment are also made of stainless steel.

✔ LOAD CAPACITY UP TO 1.000 KG

✔ SPECIAL CONSTRUCTIONS UPON REQUEST

✔ SPECIAL DIMENSIONS UPON REQUEST

  • some optionals
  • Use in cold store
Type Stainless steel forklift trucks Class Stainless steel manual and semi-electric pallet trucks
Load capacity (Kg) 1000 Lifting capacity (mm) 800

STABILITY

A set of side stabilisers is automatically pressed towards the floor, when the forks are lifted, and then they lift the steering wheels throughout their height from the floor. In this position they act as parking brake. The load wheel supports have been shaped in such a way that they can almost touch the floor with forks at full height. Therefore they further ensure front stability.

HYDRAULIC PUMPS

The 2-stage manual pump includes a “quick lift” valve, which doubles the lifting speed when the load is lower than 100 kg. The electro-hydraulic pump is provided with a safety valve. The pump unit is protected by a plastic cover. The lifting cylinder is directly welded to the pump base plate and the oil tank is welded around the lifting cylinder, thus ensuring very good seal.

OPTIONAL VERSIONS

  • External fork extension: 480 mm and 685 mm
  • Fork dimensions: 700* at 2000 mm
  • Powered at 220 V from the mains
  • Parking brake
  • Wheels upon request
  • * The lifting height is reduced for a fork length lower than 1200 mm

 

 
Portata 1000 kg
Outside width 560 mm
Fork length 1200 mm
Height of forks from ground 90 mm
Steering wheels Nylon
Load wheels Nylon
Weight 135 kg

Samag Industriale S.r.l.

Loc. Pagana - 29017 Fiorenzuola d'Arda (PC) | Italy

Tax Code and VAT nr. IT01391910336
Reg. Imprese 01391910336/PC
R.E.A n° 158552/PC

+39 0523 981598

+39 0523 943128

 

©2024 Samag Industriale S.r.l. | Privacy PolicyWebsite creationCookies Policy

Range of forklift trucks