ELT INOX P

ELT INOX P, stainless steel stacker truck
ELT INOX P, stainless steel stacker truck
ELT INOX P, stainless steel stacker truck - available with lengthened tiller arm connection for better manoeuvrability
ELT INOX P, stainless steel stacker truck - available in version with operator platform with side guards
ELT INOX P, stainless steel stacker truck - drawing
ELT INOX P, stainless steel stacker truck - drawing of version with operator platform

Stainless steel stacker truck with lifting function of the stabilisers to overcome obstacles - More powerful version

PERFORMANCE, SAFETY AND STABILITY, HYGIENE AND EASY CLEANING

ELT INOX P stacker truck by Samag is the more powerful version of ELT INOX model, made of stainless steel or non-corrosive material, thus intended to be used in environments where cleanliness and hygiene are essential conditions and where there are problems of corrosion.

All made with:

  • stainless steel frame - including linkage under the forks - bushes and bearings
  • frame with rounded shapes to reduce the deposit of residues and allow a good daily washing with fresh water
  • lifting cylinder (including pulley lifting chain) fully made of stainless steel or non-corrosive material
  • AISI 304 cast stainless steel gearbox casing
  • bonnet and tiller arm with protection degree against water sprays
  • brushless AC alternating current traction motor: less maintenance and more power
  • stainless steel bearings, pins and bushes on wheels, rollers and masts
  • spring loaded central drive wheel with adjustable load, for efficient ground contact at all times
  • plastic push-button control box resistant to corrosive agents and protected
  • Cold store version (upon request)

    ✔ LOAD CAPACITY UP TO 1.300 KG AND 1.500 KG

    ✔ SPECIAL CONSTRUCTIONS UPON REQUEST

    ✔ SPECIAL DIMENSIONS UPON REQUEST

 

  • some optionals
  • Operator transport platform
  • Lithium battery
  • Scale/Printer
  • Use in cold store
Type Stainless steel forklift trucks Class Stainless steel stackers with built-in pallet truck function for normal-intensive use
Load capacity (Kg) 1500 Lifting capacity (mm) 3500
 

 

1.1

Manufacturer

 

 

SAMAG

Characteristics

1.2 Manufacturer's type designation     ELT INOX P ELT INOX P P.O.
1.3 Drive: electric (battery or mains), diesel, petrol, fuel gas     Electric
1.4 Operator type: hand, pedestrian, standing, seated, order-picker     pedestrian seated
1.5 Load capacity/rated load Q t 1,2 (1) (7)
1.6 Load centre distance C mm 600
1.8 Load distance, centre of drive axle to fork x mm 713 (2)
1.9 Wheelbase Y mm 1320 (2)

Weight

2.1 Service weight (battery included)   Kg 1300 (3) 1390 (3)
2.2 Axle loading, laden (front / rear)   Kg 1103 / 1397 1173 / 1417
2.3 Axle loading, unladen (front / rear)   Kg 1000 / 300 1070 / 320

Wheels and frame

3.1 Tyres: solid rubber, superelastic, pneumatic, polyurethane     Vulkollan
3.2 Tyre size, front   mm 307 x 88 / 125 x 50
3.3 Tyre size, rear   mm 85x70
3.5 Wheels, number front rear (x = driven wheels)     1X - 2/4
3.6 Tread, front b10 mm 685
3.7 Tread, rear b11 mm 370

Dimensions

4.2 Height, mast lowered h1 mm (see table)
4.3 Free lift h2 mm (see table)
4.4 Lift h3 mm (see table)
4.5 Height, mast extended h4 mm (see table)
4.6 Initial lift h5 mm 120
4.8 Seat height / stand height h7 mm --- 135
4.9 Height of tiller in drive position (min. / max.) h14 mm 992 / 1366 1186 / 1386
4.15 Height of forks from ground h13 mm 87
4.19 Overall length l1 mm 1985 2090
4.20 Lenght of face of forks l2 mm 835 940
4.21 Overall width b1 mm 780 / 880 780 / 880
4.22 Fork dimensions slell mm 70 x 200 x 1150
4.24 Fork - carriage width b3 mm 700
4.25 External fork widths b5 mm 570
4.32 Ground clearance, centre of wheelbase m2 mm 28
4.34 Aisle width for pallets 800 x 1200 crossways Ast mm 2235 (4) 2362
4.35 Turning radius Wa mm 1548 (2) 1675

Performance

5.1 Travel speed (laden / unladen)   Km/h 6 / 6 8 / 9 (5)
5.2 Lift speed (laden / unladen)   m/s 0,12 / 0,22
5.3 Lowering speed (laden / unladen)   m/s 0,30 / 0,24
5.7 Gradeability (laden / unladen)   % ---
5.8 Max. gradeability (laden / unladen)   % 7 / 9
5.10 Service brake     Electric

Electric motor

6.1 Traction motor, power KB 60'   KW 1,5 AC
6.2 Lifting motor, performance 15% ED   KW 2,5
6.3 Battery DIN 43531/35/36 A, B, C,     yes
6.4 Tension / nominal capacity   V / Ah 24/240 | 24/320
6.5 Battery weight (± 5%)   Kg 215 | 265

 Altri dati

8.1 Control type     Electric AC
8.4 Sound level at the driver's ear according to DIN 10 053   dB/(A) <70
Ast comprende "a" (spazio di manovra) = 200 mm ed è inteso per posto pallet vuoto
(1) Come trasportatore + 20%
(2) Con stabilizzatori sollevati diminuisce di 46 mm
(3) Valori riferiti a "DL 3000"
(4) Diagonale secondo VDI + 145 mm
(5) Velocità con operatore seated e protezioni laterali
(6) Sconsigliato poiché comporta ridotta visibilità
(7) A richiesta versione con load capacity di 1500 Kg

OVERALL DIMENSIONS OF LIFTING GROUPS

 

Lift height h3 h2 h1 h4 h4 grid

 

           

Non telescopic NT

1700 1620 1620 2110 2130 2545

 

           

Duplex "D"

2500 2430 350 1810 2995 3360
3000 2930 350 2060 3490 3860
3500 3430 350 2310 3995 4360
             

Duplex "DL"

2500 (6) 2430 1270 1810 2990 3360
3000 2930 1520 2060 3490 3860
(6) Sconsigliato poiché comporta ridotta visibilità

Samag Industriale S.r.l.

Loc. Pagana - 29017 Fiorenzuola d'Arda (PC) | Italy

Tax Code and VAT nr. IT01391910336
Reg. Imprese 01391910336/PC
R.E.A n° 158552/PC

+39 0523 981598

+39 0523 943128

 

©2024 Samag Industriale S.r.l. | Privacy PolicyWebsite creationCookies Policy

Range of forklift trucks