ELFO INOX
Stainless steel stacker truck with seated operator
IDEAL FOR USE IN NARROW CORRIDORS AND TO HANDLE PALLETS UP TO 5.200 MM
ELFO INOX stacker truck with seated operator by Samag is made of stainless steel or non-corrosive material, thus intended to be used in environments where cleanliness and hygiene are essential conditions and where there are problems of corrosion. During horizontal movements, thanks to the transversal driving position, the operator has the best visibility conditions to make the most of the travel speed.
Electronic braking with engine recovery during reversal and speed reduction. Multifunction joystick for fork lifting and lowering proportional control and simultaneous control of traction, acceleration, deceleration and reversal.
All made with:
- frame with rounded shapes to reduce the deposit of residues and allow a good daily washing with fresh water
- exclusive mast unit for Samag with total visibility
- laminated stainless steel frame and mast unit with high resistance to bending and torsion, with quality certificate
- lifting cylinder (including pulley lifting chain) fully made of stainless steel or non-corrosive material
- AISI 304 cast stainless steel gearbox casing
- bonnet and tiller arm with protection degree against water spray
- brushless AC alternating current traction motor: less maintenance and more power
- stainless steel bearings, pins and bushes on wheels, rollers and masts
- spring loaded central drive wheel with adjustable load, for efficient ground contact at all times
- plastic push-button control box resistant to corrosive agents and protected
- Cold store version (upon request)
✔ LOAD CAPACITY UP TO
1.300 KG
✔ PERFECT COMBINATION OF PERFORMANCE EFFICIENCY AND ERGONOMICS
✔ SPECIAL CONSTRUCTIONS UPON REQUEST
✔ SPECIAL DIMENSIONS UPON REQUEST
- some optionals
- Electric steering
- Lithium battery
- Scale/Printer
- Use in cold store
| Type | Stainless steel forklift trucks | Class | Ride-on stainless steel stackers for normal-intensive use |
|---|---|---|---|
| Load capacity (Kg) | 1300 | Lifting capacity (mm) | 5200 |
|
|
1.1 |
Manufacturer |
|
|
SAMAG |
|---|---|---|---|---|---|
|
Characteristics |
1.2 | Manufacturer's type designation | ELFO INOX | ||
| 1.3 | Drive: electric (battery or mains), diesel, petrol, fuel gas | Electric | |||
| 1.4 | Operator type: hand, pedestrian, standing, seated, order-picker | seated | |||
| 1.5 | Load capacity/rated load | Q | t | 1,3 | |
| 1.6 | Load centre distance | C | mm | 600 | |
| 1.8 | Load distance, centre of drive axle to fork | x | mm | 768 | |
| 1.9 | Wheelbase | Y | mm | 1526-1544 (1) | |
|
Weight |
2.1 | Service weight (battery included) | Kg | 1410 (2) | |
| 2.2 | Axle loading, laden (front / rear) | Kg | 1120-1590 (2) | ||
| 2.3 | Axle loading, unladen (front / rear) | Kg | 980-430 (2) | ||
|
Wheels and frame |
3.1 | Tyres: solid rubber, superelastic, pneumatic, polyurethane | Supertraction | ||
| 3.2 | Tyre size, front | mm | 260 x 85 / 150 x 50 | ||
| 3.3 | Tyre size, rear | mm | 85x70 | ||
| 3.5 | Wheels, number front rear (x = driven wheels) | 1X + 2/4 | |||
| 3.6 | Tread, front | b10 | mm | 552 | |
| 3.7 | Tread, rear | b11 | mm | 380 | |
|
Dimensions |
4.2 | Height, mast lowered | h1 | mm | (see table) |
| 4.3 | Free lift | h2 | mm | (see table) | |
| 4.4 | Lift | h3 | mm | (see table) | |
| 4.5 | Height, mast extended | h4 | mm | (see table) | |
| 4.6 | Initial lift | h5 | mm | (see table) | |
| 4.8 | Seat height / stand height | h7 | mm | 920 | |
| 4.9 | Height of tiller in drive position (min. / max.) | h14 | mm | --- | |
| 4.15 | Height of forks from ground | h13 | mm | 85 | |
| 4.19 | Overall length | l1 | mm | 2090-2108 (1) | |
| 4.20 | Lenght of face of forks | l2 | mm | 940-958 (1) | |
| 4.21 | Overall width | b1 | mm | 880 | |
| 4.22 | Fork dimensions | slell | mm | 60 x 180 x 1150 | |
| 4.24 | Fork - carriage width | b3 | mm | 700 | |
| 4.25 | External fork widths | b5 | mm | 560 | |
| 4.32 | Ground clearance, centre of wheelbase | m2 | mm | 28 | |
| 4.34 | Aisle width for pallets 800 x 1200 crossways | Ast | mm | 2530-2548 (1) | |
| 4.35 | Turning radius | Wa | mm | 1741-1759 (1) | |
|
Performance |
5.1 | Travel speed (laden / unladen) | Km/h | 8 / 9,2 | |
| 5.2 | Lift speed (laden / unladen) | m/s | 0,13 / 0,26 | ||
| 5.3 | Lowering speed (laden / unladen) | m/s | 0,40 / 0,30 | ||
| 5.7 | Gradeability (laden / unladen) | % | 8 / 9 | ||
| 5.8 | Max. gradeability (laden / unladen) | % | 8 / 9 | ||
| 5.10 | Service brake | Electric | |||
|
Electric motor |
6.1 | Traction motor, power KB 60' | KW | 2 AC | |
| Steering motor | KW | 0,3 | |||
| 6.2 | Lifting motor, performance 15% ED | KW | 2,5 | ||
| 6.3 | Battery DIN 43531/35/36 A, B, C, | yes | |||
| 6.4 | Tension / nominal capacity | V / Ah | 24/500 | ||
| 6.5 | Battery weight (± 5%) | Kg | 366 | ||
|
Altri dati |
8.1 | Control type | Electric AC | ||
| 8.4 | Sound level at the driver's ear according to DIN 10 053 | dB/(A) | <70 | ||
| Ast comprende "a" (spazio di manovra) = 200 mm ed è inteso per posto pallet vuoto (1) Duplex / Triplex (2) Valori riferiti a DV 3000 |
|||||
OVERALL DIMENSIONS OF LIFTING GROUPS |
||||||
|---|---|---|---|---|---|---|
|
|
Lift height | h3 | h2 | h5 | h1 | h4 |
|
|
||||||
|
Non telescopic NT |
1700 | 1620 | 1620 | / | 2080 | 2100 |
|
|
||||||
|
Duplex "DV" |
3000 | 2430 | 150 | / | 2030 | 3460 |
| 3500 | 2930 | 150 | / | 2280 | 3960 | |
|
Duplex "DVL" |
3000 | 2945 | / | 1480 | 2030 | 3495 |
| 3500 | 3445 | / | 1730 | 2280 | 3995 | |
|
Triplex "TV" |
4200 | 4155 | / | / | 1980 | 4750 |
| 4500 | 4395 | / | / | 2060 | 4990 | |
| 4800 | 4695 | / | / | 2160 | 5290 | |
|
Triplex "TVL" |
4200 | 4170 | / | 1400 | 1980 | 4750 |
| 4500 | 4410 | / | 1480 | 2060 | 4990 | |
| 4800 | 4710 | / | 1580 | 2160 | 5290 | |